400-080-5508 400-080-5508
当前位置: 首页 » 服务项目 » 验厂服务 » FCCA 验厂 » 正文


放大字体  缩小字体
发布日期:2017-05-19  浏览次数:2534
核心提示:Factory Quality System工厂质量体系FCCA验厂 1.0 Factory Facilities and Environment工厂设施和环境 1.0.1 There is sufficient lighting on: Production, revising, finishing, inspection, packing and loading
  Factory Quality System工厂质量体系FCCA验厂

    1.0 Factory Facilities and Environment工厂设施和环境
    1.0.1 There is sufficient lighting on: Production, revising, finishing, inspection, packing and loading areas?
    1.0.2 The facility maintains clean and organized production, finishing and packing areas.
    1.0.3 Facility has separate inspection area with inspection table and proper ventilation.
    1.0.4 Facility as documented pests/mildew and moisture control program, which includes frequent inspecti*****. (In-house or 3rd party)

    工厂是否有害虫/霉菌和湿度的控制程序文件? 是否有经常巡查(公司内部或第三方检查)?
    1.0.5 No broken windows or leaking roofs that may result to product con*****ination was observed during audit.
    1.0.6 (Critical) Factory implements strict sharp tools control procedure to prevent scissors, knives, blades, broken glasses, and needles to be mixed with product.
    (严重) 工厂是否实行严格的利器控制程序,以防止剪刀、小刀、刀片、碎玻璃及针等混入产品中。
    1.1 Machine Calibration and Maintenance机器校准和维护
    1.1.1 Factory has documented system and procedure for scheduled equipment cleaning and repairs.

    1.1.2 Factory machines and equipments appear to be clean and in good running condition.
    1.1.3 Machines, equipments and tools are properly labeled with date of last maintenance/calibration and schedule.
    1.1.4 Machines, equipments and tools that need to be repaired are properly labeled to avoid accidental use.
    1.1.5 Factory has proper, clean and organized storage area of critical tooling (i.e. injection moulds) with labeled shelves.
    工厂是否有适当,整洁的存储区域储存关键模具(比如:注射模具), 并且放在有标识的架子上。
    1.1.6 Factory has proper documentation and updated inventory of machines, tools, spare parts, and equipments.

    1.1.7 Factory has maintenance team with suitable skill level and equipments to perform necessary repair and calibration on machines.
    2.0 Quality Management System质量管理体系
    2.0.1 Factory has established Quality Management System that is appropriate to their products and procedures.
    2.0.2 Workers & Supervisors are familiar to these quality policies and objectives.
    2.0.3 Factory has documented customer complaint system and documented recall program. 工厂是否建立了顾客投诉体系及产品召回程序。 
    2.0.4 (Critical) Factory QC team is independent from Production division.
    (严重) 工厂QC团队是否独立于生产部门。
    2.0.5 Production management and QC team discuss and work together in solving Quality issues/ concerns. (documented)
    2.0.6 Factory has systems and procedures in place to control the risk of physical, chemical, and biological con*****ination that may damage the product and personnel as well.
    2.0.7 Factory conducts risk assessments to identify hazards from chemicals, raw materials, process equipments, and tools.

    2.0.8 Is factory accredited with any international, national or customer quality standards association (e.g. ISO 9001, etc.)?
    工厂是否取得了国际的, 国家的或客户的质量标准组织认证证书(例如: ISO 9001证书, 等。)?
    3.0 Incoming Materials Control来料控制
    3.0.1 Has the factory taken adequate measures to assure raw materials conformance to required specificati***** before use?
    3.0.2 Proper first in-first out (FIFO) system on materials are practiced.
    3.0.3 Factory has procedures (instructi*****, guidelines, and documented records) for quality inspection on incoming raw materials, accessories, and components.
    工厂是否有进仓原物料、配件和部件的质量检验程序, 作业指导书, 及记录文件。 
    3.0.4 Is needed testing equipment available, and maintained in good condition?
    3.0.5 Are raw materials properly labeled, stored, and traceable?
    所有的原物料是否有合适的标识, 储存及可溯性?
    3.0.6 Factory has documented process and reference samples that ensure incoming raw materials conform to specificati*****.
    3.0.7 (Critical) Factory has proper system on material segregation to avoid accidental con*****ination from rejected items.
    (严重) 工厂是否建立起适当的物料控制体系, 以隔离不合格的原材料及避免意外污染?
    3.0.8 Factory properly separate good quality items from rejects and identifies non-conforming (rejects) materials for replacement. 
    3.0.9 Facility’s storage areas have sufficient lighting, well ventilated and clean surrounding. 厂房的存储区域是否有足够的照明、通风和清洁。
    3.0.10 Materials, components, and accessories are properly stacked and identified with tags / labels and off the floor.
    3.0.11 (Critical) Chemicals and maintenance substances are properly marked and stored to prevent risk of con*****ination.
    (严重) 化学品和保养的物质是否妥善标识和储存,以防止污染的风险。
    3.0.12 Does factory have a documented supplier selection and approval process?

    3.0.13 Does factory track, evaluate and document material’s supplier reliability (performance)?
    3.0.14 Does factory have an established, documented quality procedure and does factory evaluate, monitor sub-contractor quality performance and reliability?
    工厂是否建立起书面的对分包商的品质控制流程文件? 是否有评估及监督分包商的品质表现及信赖度?
    4.0 Process and Production Control过程和生产控制
    4.0.1 Does factory PD study and apply product safety features, evaluates patterns, moulds, and samples during product design and development?
    4.0.2 Factory has documented Quality procedures (QP) at each stage of operation.

    4.0. Does factory conduct Pre-production meeting prior to start of production?
    4.0.4 (Critical) Are critical quality and safety checks reviewed, identified, and acti***** for improvement documented during Pre-production meeting?
    (严重) 在产前会议中有没有审查及确认严重的质量问题和安全问题并记录采取的改进行动?
    4.0.5 Does factory conduct “pilot-run”, review product quality against specification sheet and document results with corrective acti***** prior to production?
    工厂是否进行“试生产”,根据产品规格明细检讨产品质量, 并记录在生产前的纠正行动?
    4.0.6 Was in house lab-testing performed on current production? (Request for test copies)

    4.0.7 Does factory QC compare first piece samples with approval sample and specification sheet?
    4.0.8 Are there adequate approved samples, first piece samples, reference samples, and work instructi***** to provide workers with proper guidelines?
    4.0.9 (Critical) Does Quality Control has authority to stop production if quality of products did not meet specification?
    (严重) QC是否被授权当产品质量不符合规格时是否有权停止生产?
    4.0.10 In-line inspecti***** (IPQC) are performed by QC at every operation process.

    在每一个操作过程是否由QC 执行巡检(IPQC)。
    4.0.11 Is quality of item acceptable on current production? (Check 8 finished products taken from factory final inspected goods and check for major defects on the item.)
    现行生产的产品质量是否可以接受? (检查8个已检验的完成品是否有主要缺陷)
    4.0.12 Factory QC inspects per standard AQL or as per industry standards.
    4.0.13 Factory performs 100% functionality check on final products?
    4.0.14 Does factory use corrective acti***** and root cause analysis methods? (Please provide examples)

    4.0.15 Does factory have guidelines in place to ensure packaging is correct for product?
    4.0.16 Does packing area have enough space to perform packing functi***** properly? Is it clean and organized?
    4.0.17 Packed cart***** are stored in enclosed area not exposed to sunshine and wet weather. 包装纸箱是否储存在封闭区域内, 没有暴露于阳光和潮湿天气。
    4.0.18 Does factory track and document on-time ship performance?
    5.0 In-House Lab-Testing内部实验室测试
    5.0.1 Does factory perform in-house lab testing and are facilities appropriately equipped? (Please refer to the FCCA attachment for in-house lab testing requirements.)

    工厂是否执行内部实验室测试和配备适当设施(请参考FCCA 内部实验室测试要求的附页)?
    5.0.2 All gauges and test equipments have valid calibrati*****.
    5.0.3 Testing manuals of various industry standards are available as reference.
    5.0.4 In-house Lab Technicians are properly trained to perform testing functi*****.
    6.0 Final inspection最终检验
    6.0.1 Does factory have procedure and working instruction for final QC?
    工厂有没有最终检验程序, 最终检验QC有没有工作指导书?
    6.0.2 Factory QC conducts final inspection per standard AQL or as per industry standards. 
    工厂QC 有没有根据AQL抽样检验标准或行业标准来实施最终检验。
    6.0.3 An approved sample or reference sample with packing list and shipping marks are available as reference for factory QC.
    最终检验QC有没有客户签样或参考样品, 包装清单以及出货唛头作参考。
    6.0.4 Are there formal written final inspection reports? Are they properly filed and traceable to review quality of products?
    有没有正式的最终检验报告? 这些报告是否归档及可追踪产品质量?
    6.0.5 Does factory final QC perform internal mechanical tests to ensure the safety of product?
    6.0.6 Where appropriate, are inspection and testing equipment used by the inspector in good condition and calibrated? 
    6.0.7 (Critical) Failed inspecti***** are properly corrected prior to final inspection by customer.
    (严重) 退货的产品在客户最终检验前有没有得到适当纠正。
    6.0.8 Factory does not ship goods unless subjected to release procedures from customer.
    7.0 People Resources and Training人力资源和培训
    7.0.1 (Critical) Factory conducts, documents, maintains on-job training for all personnel, or conducts pre-hire testing of skilled workers prior to hiring.
    (重要) 工厂有没有实施、记录、保持对所有人员进行岗位培训, 对技术工人在聘用前进行测试。
    7.0.2 2. Factory conducts and documents technical training programs for Electrical/ Mechanical Engineer, Machinist, QC and Lab Test Technician. 
    7.0.3 Records of trainees and all regular personnel with corresponding performance records are kept and maintained.